A paved driveway offers a variety of benefits over that is made of
gravel. Not only does it look better but it is also simpler to maintain. It
also reduces the risk that your automobile will be scratched by a stone. Paving
a Driveways in Brentwood is a major
job and it is not cheap. Therefore you need to make sure that you understand
how to find the best contractor for the job. In order to do this you need to
know exactly what is involved in paving a driveway so that you know what to
look for in a contractor's bid.
The most important thing that you need to look at when you are
having a driveway paved is the prep work. You need to make sure that the Driveways Brentwood is poured on a well prepared base. This is something that
you need to make sure that you discuss along with your contractor in Brentwood.
In most cases the least costly bids that you will get will be from companies
that do not do this part of the job properly. If you select to make use of an
affordable contractor you will find that your driveway does not last over a
couple of years.
A proper base for a driveway requires that the area be excavated
to a depth of at least a foot; this is going to cost you a little bit of money
because excavating that deep is not simple. You will then need six to eight
inches of aggregate put in as a sub-base. This is will support the whole
driveway so it's to be completed properly. Make sure that any bid that you get
from a contractor in Brentwood includes this work and that the depth and the
amount of aggregate are specified in the bid.
The next part of the driveway is the base layer; this should be at
least 2 inches thick. It is important to keep in mind when you are getting a
bid for your Driveways Brentwood that the bid specify that the base be at a compacted thickness of
inches. If not you may find that they pour inches of asphalt and then compact
it down to a much smaller amount. Two inches is necessary to make sure that
your driveway can support the weight of your automobile.
After the base layer is done the final step in paving a driveway
is the top layer which should be at least one and half inches thick. The
important thing here is to ensure that the proper asphalt mix is used
On last thing that you should ensure is included in the bid that
you get is the slope of the driveway to permit for drainage. You don't require
water pooling in the midst of your Driveways
Brentwood so it should slope down
from the middle towards the sides. Normally a slope of a quarter inch for each
foot of distance is ideal. A contractor will know the proper slope but you need
to make sure that this is included in the bid so that there is no confusion.
Actually finding a contractor to pave your Driveway in Brentwood should
not be all that hard, there are plenty of them. The best place to start is to
ask for referrals from people that you know. In case you know anyone who has
had their driveway paved they could probably recommend anyone. Another option
is if you know any general contractors who build houses they could be a great
source as they work with paving contractors on a regular basis. The objective
here is to make a list of at least contractors that you can research further.
About Company: Co-Operative
Contractors have over 10
years experience in planning and supplying driveways. They have a wealth of
knowledge and can offer you a free site survey, free design and planning and a
free estimate.
No comments:
Post a Comment